PT Karya Pangestu id-id http://karyapangestu.com/berita/detail/alumol IntroductionAlumol™ is a range of high-performance lubricants specifically developed for the drawing of pure aluminium and aluminium alloy wire. All products in the Alumol™ range contain an optimised combination of natural and synthetic lubricity additives. The Alumol™ range’s high affinity for aluminium provides exceptional film strength to deliver outstanding surface finish and die life. The use of high-purity base oil and the latest antioxidant technology minimises thermal degradation and significantly extends service life.All Alumol™ lubricants have the ability to absorb small quantities of water – preventing problems such as wire breaks and surface scratching that are usually caused by ingress of moisture.Features and benefitsProvides optimum boundary lubrication to protect dies and provide outstanding surface finish on drawn wire.Excellent resistance to thermal degradation extending service life. Low viscosity aids separation of aluminium fines and pumpability.Able to absorb some moisture without compromising lubrication performance. Functions well with both the FILTERMET centrifugal cleaning system and Alumol™ VRX to further extend life and maximise performance, delivering significant cost savingsPack sizesAlumol™ products are available in 205 litre drums and 1000 litre IBCs.The Alumol™ Selector Chart http://karyapangestu.com/berita/detail/arvina-aw-eco PRODUCT INFORMATIONMOLYSLIP ARVINA AW ECO is a premium performance grease formulated using a combination of high-quality vegetable and ester base oils and advanced synthetic additives that has been specifically designed to operate in the most extreme environments. The superior water resistance and corrosion protection offered by ARVINA AW ECO facilitates use in applications subjected to frequent wash down or total immersion in water where the product’s excellent water displacing properties allow it to be applied in-situ to cold/wet metals.MOLYSLIP ARVINA AW ECO is ideal for the lubrication of open gear sets of rotary kilns, tube and ore mills, semi-enclosed drive gears, jack-up screws, racks, slideways, crown gears, valves, shafts, pivots, joints and articulations, pin bush connections, injector head chains and all slow moving anti-friction and plain bearings etc.MOLYSLIP ARVINA AW ECO is formulated from readily biodegradable base fluids and thickener; containing materials that pose little or no risk to the environment.Excellent extreme pressure and anti-wear performanceExceptional mechanical stability extends relubrication intervalsFEATURES AND BENEFITSHighly adhesive, self-repair filmOutstanding wash-off resistanceSuperior corrosion protectionHighly resistant to water wash-offSuitable for all moving and static load-bearing applicationsPACKAGINGAvailable in 18kg Pails http://karyapangestu.com/berita/detail/hichip WATER SOLUBLE CUTTING AND GRINDING FLUIDS HI-CHIP NC series Fully-synthetic cutting fluids designed for light to medium duty cutting on both CNC Lathe and Machining Center as well as Grinder. These products have excellent resistance to bacteria and fungus attack, thus provide longer life than other types of cutting fluid. Besides the fluids transparency and good anti-foaming agent provide excellent visibility during cutting even with high pressure pump. HI-CHIP SX & EX series Semi-synthetic and emulsion type cutting fluids designed for light to heavy duty cutting on both CNC Lathe and Machining Center. These products have strong anti-corrosive ability especially used for cutting non-ferrous materials such as aluminum, and with its excellent lubricity it provides good finishing and prolongs tools life. HI-CHIP WX series Fully-synthetic chemical type solution designed for grinding operation on ferrous and non-ferrous materials. This product has good operating performance in the grinding process due to its excellent anti-foaming and grind stone clogging preventive ability. http://karyapangestu.com/berita/detail/coolant-proportioning-pump Water powered proportioning pumps can mix any coolant and pump the mixture almost any distance. When you need an accurate coolant proportion along with the ability to pump that fluid across your shop floor to the point of use, then you’re ready for the positive displacement proportional mixer capability of a Proportioning Pump. The coolant proportioning pump is a core component of the Dazzle™ 1 and Dazzle™ 2 systems.Delivers fluid 25' vertically and 800' laterallyChoose from various flow ratesChoose from various concentration rangesClear 6' plastic intake hose, for all containers, includedWall mount configuration availableFor use with concentrates to 700 SUS viscosity10-70 psi incoming water pressureWhen you need an accurate coolant proportion along with the ability to pump that fluid across your shop floor to the point of use, then you're ready for the positive displacement proportional mixer capability of a Proportioning Pump. http://karyapangestu.com/berita/detail/copaslip PRODUCT INFORMATIONCOPASLIP™ is a high-performance compound specifically formulated to protect fasteners from seizure-induced by extremes of temperature, pressure, and corrosion. The semi-synthetic base fluid is reinforced with anti-oxidants, corrosion inhibitors, and ultra-pure copper particles to provide outstanding protection to threads and components.COPASLIP™ minimises variations in frictional interference between threads, allowing accurate and consistent assembly. It also prevents galling and seizure during assembly and dismantling – even after long periods of exposure to high temperatures, corrosive environments or high pressure.FEATURES AND BENEFITS Ensures consistent friction between threads Protects against galling and seizure Protects against rust and corrosion Eases assembly of tight-tolerance components Withstands extreme temperature up to +1100°C PACKAGING100g tube, 400ml aerosol, 500g tin, 5kg and 20kg pailTECHNICAL DATA (TYPICAL VALUES)PropertyResultConsistencyNLGI 2Base oil viscosity100 cStDrop point>300°C (non melting)                    Flashpoint (IP34)>200°CEffective temperature range-40°C up to + 1100°CSolidification point (of the base fluid)-20°CCoefficient of friction (Steel on steel, steady-state)0.12When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener.Correct torque settings can be calculated using the tables and charts below and the standard thread equation:T = KDPT = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factorMaterialK Nut factor                    8.8 Steel self-coloured0.14 8.8 Steel BZP0.108.8 Steel hot-dip galvanised0.14A2 Stainless steel0.13Brass0.12 http://karyapangestu.com/berita/detail/wrls10 PRODUCT INFORMATIONMolyslip® S10 is a premium-performance lubricant specifically designed to overcome the challenge of effectively lubricating and protecting steel wire ropes. Formulated from high-quality base oils and incorporating a pseudoplastic thickener system, Molyslip® S10 solves the problem of balancing penetrating properties and wash-off resistance, without the unnecessary compromises of conventional greases.The majority of wear and corrosion of a wire rope occurs in the core. This is hidden away from view and difficult to reach through the outer strands. Therefore an effective rope lubricant must have excellent penetration properties to deliver protection in this vital area. This is best achieved by low viscosity materials that have little resistance to flow. However, low viscosity products have poor resistance to wash-off caused by rain or water immersion, for this a tenacious high viscosity material is required. These competing and opposite demands often result in a compromise product.Molyslip® WRL-S10 does not compromise. By utilizing a thickener system that exhibits pseudoplastic behavior Molyslip® WRL-S10 provides both excellent penetration and wash-off protection.Molyslip® WRL-S10 is suitable for use on most wire rope types and constructions operating in a wide variety of conditions and equipment such as cranes, ports, oilfield, construction, and mining. They can also be used in applications such as ROV umbilical cables to protect from corrosion.FEATURES AND BENEFITSHigh-load carrying and wear reduction capability protects wires and strands from wearExcellent corrosion resistance protects ropes operating in wet conditionsHighly adhesive, tenacious film extends re-lubrication intervalsExcellent low-temperature flexibility prevents flaking and crackingWRL-S10 is a translucent grease designed to allow easy inspection of the ropePACKAGINGWRL-S10 is available in a 18kg pail http://karyapangestu.com/berita/detail/as40 PRODUCT INFORMATIONMolyslip® AS40 anti-scuffing and assembly paste is a high-performance lubricant containing molybdenum disulphide (MoS2) and graphite, formed into a soft paste.Molyslip® AS40 is designed for use in situations where a hydrodynamic oil film cannot be tolerated or is impossible to achieve – for example during component assembly, machine start-up and high load/slow speed operations. The high load-carrying capacity of the MoS2 and graphite solids (in excess of 140,000 psi which is above the yield point of most metals) provides an ultra-low-friction physical barrier between metal surfaces preventing micro-welding or pick-up that can irrevocably damage components from occurring.Molyslip® AS40 is suitable for multiple uses including: as an anti-seize on fasteners, an assembly aide, a lubricant on sliding mechanisms, plain bearings, pins, bushes and valves and as start-up or run-dry protection on gears.FEATURES AND BENEFITSEnsures bedding in without scuffing or scoringReduces wear and cuts costsProtects against rust and corrosionEases assembly of tight tolerance componentsWithstands extreme loadsPACKAGING500g tin and 5kg pailTECHNICAL DATA (TYPICAL VALUES)PropertyResultConsistencyNLGI 1Particle sizeMolybdenum disulphideGraphite0.5 to 5.0 microns1.0 to 8.0 microns                    Flashpoint (IP34)>200°CEffective temperature range-100°C up to + 500°CSolidification point (of the base fluid)-20°CCoefficient of friction (Steel on steel, steady-state)0.08When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener. Correct torque settings can be calculated using the tables and charts below and the standard thread equation: T = KDP T = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factorMaterialK Nut factor                         8.8 Steel self-coloured0.088.8 Steel BZP0.088.8 Steel hot-dip galvanised0.11A2 Stainless steel0.10Brass0.11 http://karyapangestu.com/berita/detail/arvina-ogaw-eco Molyslip® Arvina OG-AW ECO is specially developed to deliver it’s characteristically high-load carrying and anti-wear properties with the added benefit of being environmentally friendly. Arvina OG-AW ECO is ideal for instances where environmental considerations are a priority.Features and BenefitExcellent high-load carrying anti-wear capabilityAdheres to cold and wet metalsHighly resistant to water wash-offHOCNF E Classification, Norway ‘Yellow’ rating